Wipers

         
  Wipers  

Pendulum & Pantographic Window Wipers

Cornell-Carr Company manufactures a Pendulum Type Airport and Window Wiper which combines simplicity, efficiency and durability. This motor driven wiper can be readily mounted inboard or can be outside mounted. It is built to resist severe weather conditions inherent in navigation. Heated arms on inboard mounted wipers or heated pivots on those that are outside mounted are also available. Wipers can be provided with a window washing/anti ice feature as well as with a radio frequency suppression feature.

Pendulum Arm Wipers provide a conical wiping area, Pantographic Arm Wipers have a parallel sweep, providing awider view area. See the illustrations below for clarification. 

All parts are made of corrosion resistant material. This unit is powered by a 100/120 volt AC/DC, 1/8 HP motor with a variable rheostat speed control and a shut off switch. Various wiper arm arrangements can be furnished including single, dual arms and parallel blade motion.

The wiping angle is set to 100º swipe, the housing is watertight and all parts are resistant to salt spray and other corrosive environmental conditions.

The wiper can be mounted above, below or at the side of the windshield frame. The drive shaft supplied can be 3”, 4”, 5” or 6” depending on wall thickness.

Standard Navy Wipers, CC-5065 and CC-5086, include heater shields and uses CC-5086 Controller. CC-5065 is Inboard Mounted and CC-5086 is Outboard Mounted. These wipers have Pantographic Arms.

Commercial style wipers, CC-5100 and 5200, use CC-5137A Controller. CC-5100 is Outboard Mounted and CC-5200 is Inboard Mounted. Both are available with either Pendulum or Pantographic Arms.

Cornell-Carr also produces and services the entire Kearfott/BAE line of wipers.

Cornell-Carr also carries and configures Wynn Marine In-Line wipers and controllers

Wiper Quote Request

Wiper Flyer (PDF)

 
 
 


   


Wiper Styles
 

 

Pendulum Outboard CC-5100
Pendulum Arm

 

Pantographic Outboard CC-5100P
Pantographic Arm

     
 

 

 

 


 

CORNELL-CARR WIPER STYLES          
DWG NO. DESCRIPTION STYLE TYPE MATERIAL DETAILS NOTES
CC-5100 Window Wiper, Outboard Mount Outboard Pendulum Various Commercial Style Uses CC-5137A Controller
CC-5100P Window Wiper, Outboard Mount Outboard Pantographic Various Commercial Style Uses CC-5137A Controller
CC-5200 Window Wiper, Inboard Mounted Inboard Pendulum Various Commercial Style Uses CC-5137A Controller
CC-5200P Window Wiper, Inboard Mounted Inboard Pantographic Various Commercial Style Uses CC-5137A Controller
CC-5065 Window Wiper, Inboard Mounted Inboard Pantographic Various Navy Style Includes Heater Shield; Uses CC-5066 Controller
CC-5066 Wiper Controller     Various Navy Style For use on CC-Style heated wipers
CC-5086 Window Wiper, Outboard Mounted Outboard Pantographic Various Navy Style Includes Heater Shield; Uses CC-5066 Controller
CC-5124 Window Wiper, Heated Arm Inboard Pendulum Various Navy Style Uses CC-5066 Controller
CC-5134 Window Wiper, Heated Arm Outboard Pendulum Various Navy Style Uses CC-5066 Controller
CC-5137A Wiper Controller     Various Commercial Style For use on Non-Heated wiper styles
             
BAE WIPER STYLES          
DWG NO. DESCRIPTION STYLE TYPE MATERIAL DETAILS NOTES
KS-65420 Window Wiper, Outboard Mounted Outboard Pantographic Various  Commercial Uses CC-5137A Controller
KS-8362 Window Wiper, Heated Arm, Inboard Mount Inboard Pendulum Various  Navy Style Uses KS-9283 Controller
KS-9261 Window Wiper with Pivot Heater Inboard Pantographic Various  Navy Style Uses KS-9283 Controller
KS-1385-IB Window Wiper, Inboard Mount Inboard Pendulum Various  Commercial Uses CC-5137A Controller
KS-1385-OB Window Wiper, Outboard Mount Inboard Pendulum Various  Commercial Uses CC-5137A Controller
KS-9205 Window Wiper with Pivot Heater Outboard Pantographic Various  Navy Style Uses KS-9283 Controller
KS-9283 Wiper Controller     Various Navy Style For heated BAE style wipers

 



Wiper Quote Request

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. CC-5065 Navy Style Inboard Wiper, with Pivot Heater

    CC-5065 Navy Style Inboard Wiper, with Pivot Heater

    Out of stock

    Cornell-Carr's marine wipers are built to the to the highest durability standards, tested and approved for military use.
    CC-5065 is our Navy standard inboard mount with a pivot heater to prevent freeze-up.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5066
    Learn More
  2. CC-5066 Navy Style Wiper Controller with Heater Switch

    CC-5066 Navy Style Wiper Controller with Heater Switch

    Out of stock

    Cornell-Carr's marine wipers are built to the to the highest durability standards, tested and approved for military use.
    CC-5066 is our Navy standard wiper controller with heater switch.

    Click here for Drawing of CC-5066

    • For use with wipers CC-5065, CC-5086, CC-5124, CC-5134.
    • Conforms to MIL-W-3459 
    • For non-heated wiper controller see CC-5137A
    • Finish: Grey enamel
     
    Learn More
  3. CC-5086 Navy Style Outboard Wiper, with Pivot Heater

    CC-5086 Navy Style Outboard Wiper, with Pivot Heater

    Out of stock

    Cornell-Carr's marine wipers are built to the to the highest durability standards, tested and approved for military use.
    CC-5086 is our Navy standard outboard mount with a pivot heater to prevent freeze-up.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5066
    Learn More
  4. CC-5100 Commercial Outboard Wiper, Pendulum Arm

    CC-5100 Commercial Outboard Wiper, Pendulum Arm

    Out of stock

    Cornell-Carr's marine wipers are built to the same durability standards as our military wipers.
    CC-5100 is our commercial standard outboard mount with a pendulum arm.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5137A
    Learn More
  5. CC-5100P Commercial Outboard Wiper, Pantographic Arm

    CC-5100P Commercial Outboard Wiper, Pantographic Arm

    Out of stock

    Cornell-Carr's marine wipers are built to the same durability standards as our military wipers.
    CC-5100P is our commercial standard outboard mount with a pantographic arm.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5137A
    Learn More
  6. CC-5124 Navy Style Inboard Wiper, with Heated Arm

    CC-5124 Navy Style Inboard Wiper, with Heated Arm

    Out of stock

    Cornell-Carr's marine wipers are built to the to the highest durability standards, tested and approved for military use.
    CC-5124 is our Navy standard inboard mount with a heated arm to prevent freeze-up.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5066
    Learn More
  7. CC-5134 Navy Style Outboard Wiper, with Heated Arm

    CC-5134 Navy Style Outboard Wiper, with Heated Arm

    Out of stock

    Cornell-Carr's marine wipers are built to the to the highest durability standards, tested and approved for military use.
    CC-5124 is our Navy standard outboard mount with a heated arm to prevent freeze-up.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5066
    Learn More
  8. CC-5137A Commercial Style Wiper Controller

    CC-5137A Commercial Style Wiper Controller

    Out of stock

    Cornell-Carr's marine wipers are built to the to the highest durability standards, tested and approved for military use.
    CC-5137A is our standard wiper controller for non-heated wiper systems.

    Click here for Drawing of CC-5137A

    • For use with wipers CC-5100, CC-5100P, CC-5200, CC-200P.
    • Conforms to MIL-W-3459 
    • For heated wiper controller see CC-5066
    • Finish: Grey enamel
     
    Learn More
  9. CC-5200 Commercial Inboard Wiper, Pendulum Arm

    CC-5200 Commercial Inboard Wiper, Pendulum Arm

    Out of stock

    Cornell-Carr's marine wipers are built to the same durability standards as our military wipers.
    CC-5200 is our commercial standard inboard mount with a pendulum arm.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5137A
    Learn More
  10. CC-5200P Commercial Inboard Wiper, Pantographic Arm

    CC-5200P Commercial Inboard Wiper, Pantographic Arm

    Out of stock

    Cornell-Carr's marine wipers are built to the same durability standards as our military wipers.
    CC-5200P is our commercial standard inboard mount with a pantographic arm.

    • Blade pressure against window adjusts from 16 oz. to 32 oz.
    • Conforms to MIL-W-3459 
    • Requires controller CC-5137A
    Learn More

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction